Anti Bark No Barking Training Shock Control Collar for Small Medium Large Dog
Product Description:
1.Integration of static stimulation and tone command.
2.Different levels of static stimulation to teach your pet to behave.
3.Microprocessor controlled.
4.Led flash signal light.
5.Low battery consumption.
Feature:
Specification - Collar
Collar length adjustable from 12" to 20"
Power: 6V battery (included)
Principles of Operation :
The bark control collar first applies a warning tone followed by progressively increasing tone and shock as your dog's barking persist. If your dog is quiet for 30 seconds or more, the bark control collar resets to the mildest correction level. If a second bark occurs within thirty seconds, a more intense tone is sounded along with a short, mild shock. If your dog barks a third time, both the tone and shock are made more intense. This pattern is repeated through five correction levels. If your dog continues to bark through all five levels, the most intense sound and shock are applied after each bark until your pet stops for thirty seconds. In this way, your pet needs only to experience the higher shock levels a few times before learning that the mild sound and shock stimulus is a warning of stronger corrections to come. Your pet will quickly learn to SHUT UP at the mild correction without having to suffer the more intense stimulus. We have found this technique of progressively increasing sound and shock is not only more humane, it is more EFFECTIVE in breaking the barking habit than conventional shocking bark control collars.
Matching Receiver and Transmitter
1. Turn on the transmitter by the switch on right side of it
2. Install the batteries for the receiver. The LED inside the receiver starts to keep flashing. Press vibration or shock
button immediately after batteries are put into the receiver firmly. Then the LED will stop flashing and only light which indicates that the transmitter and the receiver have matched each other successfully.
3. If LED stops flashing on its own without press any button in the transmitter, take out the batteries. Wait for at least 10 Seconds and try step 2 again.
4. Put the cover on the receiver firmly
5. Attach the receiver to the collar.
How to Check Shock:
1. Use a test light. Put the test light on both nipples in the receiver then press shock button on the remote controller. The light will flash. Remember, the test light is designed specifically for testing only and not a normal part of collar used for the dog. Please take it off this light after the test.
2. Use your finger. Put your on both nipples in the receiver then press shock button on the remote controller. You will feel the shock.
Trouble shooting:
If collar appears not to be working, try the following.
1.Adjust the collar to fit
2.Recharge the battery
3.Check that the probes are touching the dog’s skin
4.If necessary, trim the dog’s hair or use the longer probes to ensure proper skin contact
5.If you cannot solve the problems, please email us
Warm attention:
There is something like loose in Receiver is normal, pls don't worry, the things like loose is just a Power-saving sleep switch. it's just for protecting your pet from shock all the time even if it don't bark.
Package Included:
1 /2 x Collar
1/2 x Test light
1/2 x 6v batteries
Product Description Note:
Not suitable for chihuahua